From the Golden Days Heating & Cooling team
1. Check the air filter
A dirty filter is one of the most common causes of trouble. It can make a furnace overheat and shut down, or cause ice to form on an air conditioner coil because not enough air is moving across it. If the filter looks gray and clogged, replace it.
2. Look at the condensate drain
High efficiency furnaces, air conditioners and heat pumps produce water that drains away through a small line. When that line clogs, you may see water pooling near the unit. Depending on the sensors in your system, it may keep running or shut itself off.
3. Check the thermostat
Make sure it is set to heat or cool and to a temperature that should make the system run. If it uses batteries, replace them. This is less common than it used to be, but it still happens.
4. Check power
Look for a tripped breaker, and make sure the service switch near the furnace or indoor unit is on. It often looks like a regular light switch and is easy to bump.
5. Clear the outdoor unit
For an air conditioner or heat pump, make sure leaves, snow or plants are not blocking the outdoor unit.
One thing not to do
If you are thinking about cutting power to reset the system, know that a reset can erase the error codes the unit has stored. Those codes help a technician find the problem faster. Newer systems are getting better at keeping codes through a reset, but many systems in homes today do not. If you have already called for service, please leave the system as it is until the technician can check.
Still not working?
Write down what you see: any error code, what the thermostat shows and when the problem started. Then call us at (330) 722-7101. That information helps us send the right technician with the right parts.
Want a straight answer for your home? Call (330) 722-7101 or send us a request. Estimates come within 24 hours.
